How to design Granite marble slab racking system.It's based on design of size of granite or marbel stone.
Marble Specifications Size:
1, the original board: Hair board (large board) is generally about 3 * 1.3 meters, the target plate 1.8 * 0.6 meters, the size and stone material and mining equipment and transport restrictions.
2, the finished board, the size of the original board size processing, by the board texture and paving the general effect of length and width does not exceed 1 m, long and narrow width of not less than 0.05 meters; usually do floor paving marble using 80 * 80CM, wall Surface size is generally not more than 1 square by weight impact;
3, to do the table (wash the table, coffee table, bar, etc.) use, the width of 60CM, the length of not more than 1.5 meters, and need to be strengthened.
The thickness of marble countertops made of solid surface material is as follows:
1, Length: 3680mm (highest) in the range, including standard size: 2440mm, 3050mm, 3680mm
2, the width of the 960mm (maximum), including the standard width: 960mm; 3, the thickness: 6mm above, including the standard thickness of 6mm, 12mm, 15mm, 20mm, 30mm pure acrylic solid surface can be made of a single 4mm thick of.